Curved Beam Trolley

Products Curved Beam Trolley
Plain Type

产品特性

曲线横梁手推小车是适用于曲线横梁的优化型特殊产品。由于曲线横梁不可避免的特殊性,标准手推小车产品无法满足使用需求时,可考虑选择此类产品。

Structure

DBPT 1.0 ~ 3.0 TONS
DBPT 1.0 TON

Specifications

MODEL CAPACITY (TON) I-BEAM FLANGE WIDTH (mm) MIN. CURVE RADIUS (mm) NET WEIGHT (kgf)
DBPT-010 1.0 75 ~ 125 600 .0 20.0
DBPT-020 2.0 100 ~ 150 700 .0 32.0
DBPT-030 3.0 100 ~ 150 800 .0 50.0
* Contact us, if larger I-BEAM FLANGE WIDTH is used.

Dimensions

MODEL CAPACITY(TON) DIMENSIONS (mm)
I-BEAM FLANGE WIDTH H (Min) L H1 W C D T T1
DBPT-010 1.0 75.0 122.0 456.0 237.0 161.0 98.0 30.0 18.0 10.0
DBPT-020 2.0 100.0 168.0 486.0 293.0 194.0 102.0 42.0 24.0 15.0
DBPT-030 3.0 100.0 184.0 606.0 343.0 210.0 134.0 45.0 26.0 18.0
* “W” value is based on I-BEAM FLANGE WIDTH.
* H (Min) value can differ ±5% depending on selected beam’s thickness.
Geared Type

产品特性

曲线横梁手拉小车也是一款适用于曲线横梁的优化型特殊产品。由于曲线横梁不可避免的特殊性,标准手拉小车产品无法满足使用需求时,可考虑选择此类产品。手拉链条的长度决定了手拉小车可到达的操作位置,需选择适当的手拉链条长度。

Structure

DBGT 1.0 ~ 30.0 TONS
DBGT 1.0 TON

Specifications

MODEL CAPACITY(TON) I-BEAM FLANGE WIDTH (mm) MIN. CURVE RADIUS (mm) HAND CHAIN CHAIN WEIGHT / LIFT 1m (kg) NET WEIGHT (kg)
HAND CHAIN
DBGT-010 1.0 75 ~125 600 2.5 0.92 25.0
DBGT-020 2.0 100 ~150 700 2.5 0.92 36.0
DBGT-030 3.0 100 ~150 800 2.5 0.92 56.0
DBGT-050 5.0 125 ~175 1200 3.0 0.92 80.0
DBGT-100 10.0 150 ~190 1500 3.0 0.92 235.0
DBGT-150 15.0 150 ~190 2000 3.5 0.92 395.0
DBGT-300 30.0 175 ~190 6500 3.5 0.92 X 2 850.0

Dimensions

MODEL CAPACITY(TON) DIMENSIONS (mm)
I-BEAM FLANGE WIDTH H (Min) L H1 W1 W2 C D T T1
DBGT-010 1.0 75.0 142.0 456.0 256.0 149.0 96.0 98.0 30.0 18.0 10.0
DBGT-020 2.0 100.0 176.0 491.5 301.0 169.0 111.0 102.0 42.0 24.0 15.0
DBGT-030 3.0 100.0 203.0 616.0 362.0 173.0 116.0 134.0 45.0 26.0 18.0
DBGT-050 5.0 125.0 235.0 680.0 402.0 210.0 134.0 138.0 56.0 30.0 22.0
DBGT-100 10.0 150.0 279.0 914.0 518.0 246.0 165.0 196.0 80.0 42.5 40.0
DBGT-150 15.0 150.0 375.0 1048.0 654.0 264.2 211.0 215.0 120.0 65.0 65.0
DBGT-300 30.0 175.0 500.0 1420.0 782.0 305.5 305.5 232.0 140.0 77.0 70.0
* “W” value is based on I-BEAM FLANGE WIDTH.
* H (Min) value can differ ±5% depending on selected beam’s thickness.