Trolley

Products Trolley

Description of products

Trolley is designed to move load along a beam (rail). Trolley, as a device for travelling along the beam, doesn’t lift loads. Trolley is devided into Plain trolley and Geared Trolley. Curved Beam Trolley and Locking Trolley are used for special usage. Chain block is a device which is able to lift loads.

How to operate

Plain type doesn’t include operating device for travelling therefore; it works with pushing the loads or chain block. Geared type includes hand chain for operation. the geared trolley will move forward or backward, depending on which fall of the hand chain is pulled.

Cautions at use

Trolley is designed to bear vertical loads. Operating trolley with various angles may cause the side plate to break (side plates are not design to bear loads), resulting in the fall of the trolley. Load test realized by our company is for vertical loads only.

Cautions for product selection

Trolley, (except otherwise requested by customer) will be released for I-Beam. To apply Curved beam, MIN. CURVE RADIUS (mm) should be checked on the catalogue.To check minimum distance or interference with other machinery, Dimensions (mm) should be checked on the catalogue.

Notice

Beams are not supplied by our company. The strength of the beam is mainly affected by beam type and « L ». « L » is the distance between two beam support as shown in the above drawing. Contact your beam manufacturer for further information
Plain Trolley

Features

Plain trolley is optimized to move a load. To operate trolley, suspend chain block to trolley and push or pull the load.
DPT 1.0 ton
DPT 0.5 TON (Stainless Type)
DPT 1.0 TON (Parking Type)

Structure

PLAIN TROLLEY 0.5 ~ 3.0 TON

Specifications

MODEL CAPACITY(TON) I-BEAM FLANGE WIDTH (mm) MIN. CURVE RADIUS (mm) NET WEIGHT (kg)
DPT 005 0.5 75 ~ 125 800 7.0
DPT 010 1.0 75 ~ 125 1200 10.0
DPT 015 1.5 75 ~ 125 1300 15.6
DPT 020 2.0 100 ~ 150 1300 15.6
DPT 030 3.0 100 ~ 150 1500 28.0

Dimensions

MODEL CAPACITY(TON) DIMENSIONS (mm)
I-BEAM FLANGE WIDTH H (Min) L H1 W C D T T1
DPT 005 0.5 75.0 112.0 192.0 216.0 170.0 86.0 28.0 18.0 10.0
DPT 010 1.0 75.0 118.0 218.0 233.0 180.0 97.0 30.0 18.0 10.0
DPT 015 1.5 75.0 157.0 242.5 273.3 195.0 92.3 42.0 24.0 15.0
DPT 020 2.0 100.0 157.0 242.5 273.3 220.0 92.3 42.0 24.0 15.0
DPT 030 3.0 100.0 173.0 309.0 332.0 183.0 133.0 45.0 26.0 19.0
Geared Trolley

Features

When the hand chain is pulled, the trolley will move forward or backward, depending on which fall of the hand chain is pulled. Hand chain length has to be notified when ordering, since there is no standard size for this chain. Keep in mind that the chain should be easily accessible for operator but not too long in order to prevent dragging on the floor.

Sturucture

DGT 0.5 ~ 15.0 TONS
DGT 50.0 TONS
DGT 20.0 ~ 40.0 TONS, 70.0 TONS, 100.0 TONS

Specifications

MODEL CAPACITY(TON) I-BEAM FLANGE WIDTH (mm) MIN. CURVE RADIUS (mm) HAND CHAIN (mm) CHAIN WEIGHT / LIFT 1m (kg) HAND CHAIN NET WEIGHT (kg)
DGT-005 0.5 75 ~ 125 800 2.5 0.92 8.0
DGT-010 1.0 75 ~ 125 1200 2.5 0.92 12.2
DGT-015 1.5 75 ~ 125 1300 2.5 0.92 18.5
DGT-020 2.0 100 ~ 150 1300 2.5 0.92 18.5
DGT-030 3.0 100 ~ 150 1500 3.0 0.92 30.5
DGT-050 5.0 125 ~ 175 1600 3.0 0.92 42.5
DGT-075 7.5 150 ~ 190 2100 3.5 0.92 80.0
DGT-100 10.0 150 ~ 190 2500 3.5 0.92 114.0
DGT-150 15.0 150 ~ 190 3200 3.5 0.92 246.0
DGT-200 20.0 150 ~ 190 8000 3.5 0.92 X 2 316.0
DGT-300 30.0 175 ~ 190 ONLY STRAIGHT 3.5 0.92 X 2 560.0
DGT-400 40.0 175 ~ 190 ONLY STRAIGHT 3.5 0.92 X 2 708.0
DGT-500 50.0 175 ~ 190 ONLY STRAIGHT 3.5 0.92 810.0
DGT-700 70.0 175 ~ 190 ONLY STRAIGHT 3.5 0.92 X 2 1340.0
DGT-1000 100.0 175 ~ 190 ONLY STRAIGHT 3.5 0.92 X 2 1674.0

Dimensions

MODEL CAPACITY(TON) DIMENSIONS (mm)
I-BEAM FLANGE WIDTH H(Min) L H1 W1 W2 C D T T1
DGT-005 0.5 75.0 104.5 185.0 213.4 71.5 126.5 92.0 30.5 18.0 10.0
DGT-010 1.0 75.0 115.0 218.0 237.7 72.5 127.5 109.0 30.5 18.0 10.0
DGT-015 1.5 100.0 147.0 234.5 292.2 88.0 143.0 129.0 44.0 26.0 15.0
DGT-020 2.0 100.0 147.0 234.5 292.2 88.0 143.0 129.0 44.0 26.0 15.0
DGT-030 3.0 100.0 173.0 309.0 332.0 91.5 149.5 124.0 45.1 26.0 19.0
DGT-050 5.0 125.0 197.0 311.0 364.0 118.0 178.5 138.0 55.3 30.0 22.0
DGT-075 7.5 150.0 242.0 366.0 438.0 146.0 226.5 156.0 80.0 36.0 30.0
DGT-100 10.0 150.0 262.0 460.0 499.5 152.0 231.0 196.0 80.0 42.5 40.0
DGT-150 15.0 150.0 413.0 510.0 690.0 173.0 262.0 213.0 120.0 65.0 65.0
DGT-200 20.0 150.0 148.0 940.0 486.0 231.0 231.0 196.0 85.0 102.0
DGT-300 30.0 175.0 157.0 1024.0 535.0 274.0 274.0 220.0 108.0 111.0
DGT-400 40.0 175.0 162.0 1020.0 560.0 304.0 304.0 225.0 118.0 111.0
DGT-500 50.0 175.0 456.0 1204.0 909.0 306.0 334.0 354.0 200.0 150.0 70.0
DGT-700 70.0 190.0 199.0 1240.0 715.0 360.0 360.0 278.0 128.0 132.0
DGT-1000 100.0 190.0 209.0 1440.0 792.0 371.0 317.0 323.0 148.0 134.0